Underfloor Heating
EdisonElectric are UK representatives of the revolutionary EP Warmfloor System. If you need more information on the warmfloor system please contact our team.
What is the EP Warmfloor System?
EP warmfloor is a Norwegian developed system made for future demands of healthy heating. The priority is comfort for the human need, safety and energy efficiency. A building height from 1,2 mm, easy installation, self-regulation and 24 Volt makes the product unique. More than 20 years of continuous development ensures that the advanced technology makes it endurable and easy to use. EP warmfloor has been tested by several in- ternational laboratories and is approved for installation in dry, damp and wet rooms according to norms and regulations. Installation of elements can be done by anybody, but before covering, a certified electrician must inspect and connect the wires to the house net.
The EP warmfloor is based on 1,2 mm thick and 34 cm wide heating elements of carbon-enriched polyethylene with copper braid embedded along both edges. All of the plastics is electrically conductive. Because of the resistance in the material, heat is developed. An advantage of this technology is the self-regulating effect. The elements are cut to desired lengths and clips are mounted for wire connection. Safety transformers running on 24 Volt ensures a secure system.
The self-regulating effect (PTC), means that every little piece of the plastic is its own thermostat. When room temperature increases, the resistance in the material increases and electricity consumption de- creases This also happens under local area covering, in this way the elements can not overheat. The temperature on the heating elements rarely exceeds 27 to 28oC when connected to 24 Volt. Floor surface temperature will normally be 25 - 26oC, giving a com- fortable and healthy floor heating for both people and animals.